Ecom, 7022601H J2KN Pro INDUSTRIAL Portable Emission Analyzer


Description

Old Part # RBR70210

Old Part #
New Part #
Model
Description
RBR 70210
7021001H
J2KN Pro INDUSTRIAL OCNX
O2,Low CO,NO,NO2
RBR 70212
7021201H
J2KN Pro INDUSTRIAL OCN.X. Low Nox
O2,Low CO,NO,NO2 (NOx range 0-550ppm,resolution 0.1ppm)
RBR 70214
7021401H
J2KN Pro INDUSTRIAL OCVNX
O2,Low CO,High CO,NO,NO2
RBR 70216
7021601H
J2KN Pro INDUSTRIAL OCNXS
O2,Low CO,NO,NO2,SO2
RBR 70220
7022001H
J2KN Pro INDUSTRIAL OCVNXH
O2,Low CO,High CO,NO,NO2,Combustibles
RBR 70226
7022601H
J2KN Pro INDUSTRIAL OCNX-IR
O2, Low CO, NO, NO2. Must add IR bench. Option to add 2 additional electrochemical sensors.

Features:

1.  Wireless Handheld Remote Display
2.  Up to 9 Gas Sensors (6 Electrochemical and 3 NDIR)
3.  Sensor Options: O2,CO,CO High,NO,NO2,SO2,Combustibles,CO2 & Methane
4.  Data Logging with Memory Card
5.  USB Interface
6.  Bluetooth Link
7.  On-Board Printer
8.  15ft Sample Line*
9.  1ft Inconel Probe (up to 1832F/1000C)*
10. CO Purge Pump to Prevent Oversaturation
11. Peltier Cooler Sample Conditioner
12. Peristaltic Pump for Automatic Moisture Removal
13. Heated Sensor Block for Thermal Stability
14. Digital Flow Meter Display
15. Fresh Air Purge Switch
16. Dual Range CO Sensors
17. Self Leak Check
18. Flue Gas, Ambient & Sensor Temperature Sensors
19. Averaging Tests
20. Mass Emission Calculations
21. CO2,Efficiency,Losses,Excess Air & O2 Correction Calculations


*Other lengths available. Please ask an ECOM sales associate for details.
he J2KN Pro INDUSTRIAL represents the ultimate design in accurate gas analysis and is unsurpassed in the field of premier portable emissions analyzers. If you have a heavy-duty testing schedule, this is the analyzer for you. In addition to holding up to 6 electrochemical sensors, the J2KN Pro INDUSTRIAL supports an NDIR bench to measure CO2,CO up to 63,000ppm,and CH4. This allows measurement of 9 gases in one compact portable analyzer! When matched with our Advanced DAS Compliance Testing Software, the J2KN Pro INDUSTRIAL offers complete automation of the test procedure so you can get your compliance tests done accurately and efficiently. Advanced features include stack flow velocity,NDIR bench,fresh air bypass switch,heated sensor block for thermal stability,on-board heated line power connection,dual range CO sensors for high accuracy in rich and lean conditions,and the ability to set up automatic test cycling for unattended operation.

What's New On The J2KN Pro EASY?

1.  NDIR Bench for Measuring CO2,high CO,and CH4
2.  Fresh Air Bypass Switch - From the Remote!
3.  Heated Sensor Block
4.  Stack Flow Velocity Probe (Option)
5.  Air Leak Detection
6.  Digital Flow Meter Display
7.  What Is Included With The J2KN Package?

What Is Included With The J2KN Package?

- Analyzer with metal chassis built in to aluminum-framed carrying case - Under case storage compartment - Handheld display for complete wireless remote control - 15-foot Teflon sample line - 1-foot Inconel probe - Consumables pack: 10-pack particulate filters,1 spare NOx/SOx filter tube,2 in-line filters,1 extra roll of printer paper,vent filter pack,and 1 refill container of NOx/SOx filter media - Moisture drain tubing - T-10 torx wrench - Ambient temp. sensor stick - Calibration magnet - Antenna for base analyzer - Power cord - 2 case lock keys - Padded shoulder strap - ECOM folder with Operations Manual and Calibration Certificate

SPECIFICATION
MEASUREMENT (KEY)
RANGE
ACCURACY
RESOLUTION
SENSOR LIFE
SENSOR TYPE
Oxygen (O)
0-21vol%
0.1 vol%
0.1vol%
2 Years
Electrochemical
Carbon Monoxide (C)
0-4,000 ppm
± 2% Measured*
1 ppm
3 Years
Electrochemical
Carbon Monoxide (V)
0-40,000 ppm
± 2% Measured*
1 ppm
3 Years
Electrochemical
Nitric Oxide (N)
0-4,000 ppm
± 2% Measured*
1 ppm
3 Years
Electrochemical
Nitric Oxide (.N)
0-400 ppm
± 2% Measured*
0.1 ppm
3 Years
Electrochemical
Nitrogen Dioxide (X)
0-500 ppm
± 2% Measured*
1 ppm
3 Years
Electrochemical
Nitrogen Dioxide (.X)
0-50 ppm
± 2% Measured*
0.1 ppm
3 Years
Electrochemical
Sulfur Dioxide (S)
0-5,000
± 2% Measured*
1 ppm
3 Years
Electrochemical
Combustibles (H)
0-6.00% vol.
± 2% Measured*
0.01%
5years
Peellister
Gas Temperature
32°-1800°F
± 2% Measured*
1°F
10 Years
NiCrNi
Ambient Temperature
0-250°F
± 2% Measured*
1 deg F
10 Years
Semi-Conductor
Draft / Pressure
± 40" H2o
± 2% Measured*
0.1% H2O
10 Years
DMS
Carbon Dioxide
0-20%
±5% Measured*
0.1% vol%
4 Years
Infrared
Carbon Monoxide
1000-63,000ppm
±5% Measured*
10ppm
4 Years
Infrared
O2 Correction
0-20% Oxygen
Smoke Scale
0-9
Carbon Dioxide (CO2)
0-CO2 max of fuel
Calculated
Efficiency
0-99.9%
Calculated
Exxess Air (Lambda)
1- Infinity
Calculated
*ACCURACY: When calibrated prior to use per ECOM America,Ltd. specifications.
PHYSICAL
EASY
Instrument: 17" x 9.75" x 12"
Weight: 28 lb. complete with sampling system

INDUSTRIAL
Instrument: 20" x 9.75" x 12"
Weight: 29 lb. complete with sampling system
ELECTRICAL
AC: 110/220V 50/60Hz (User selectable)
Batteries: 4-6 hour battery life,12V lead-acid
Pump: Flow rate of 3.5+ lpm
Display: Backlit,adjustable contrast & zoom,displays all
parameters simultaneously.
OPERATING TEMPERATURE
Core temperature of the instrument is monitored continuously.
Internal Temperature Compensation software assures accurate
sensor response over the range of 20°F to 104°F.

Optional Accessories

Ecom, 7530601HIR Bench with 3 Sensor
Ecom, 7952501H-15Heated Sample Line for Increased Accuracy
Ecom, 7952501H-30Heated Sample Line for Increased Accuracy
Ecom, 7533601H-CH4J2KN Pro INDUSTRIAL IR Bench 1 sensor
Ecom, 7533601H-COJ2KN Pro INDUSTRIAL IR Bench 1 sensor
Ecom, 7533601H-CO2J2KN Pro INDUSTRIAL IR Bench 1 sensor
Ecom, 7533901H-CO-CH4J2KN Pro INDUSTRIAL IR Bench 2 Sensor
Ecom, 7533901H-CO2-CH4J2KN Pro INDUSTRIAL IR Bench 2 Sensor
Ecom, 7533901H-CO2-COJ2KN Pro INDUSTRIAL IR Bench 2 Sensor

Related product you might see:

Share this product :

Post a Comment

 
Support : PT.TRIAS NATHOMI CHEMINDO | Alat-Alat Laboratorium | Indonesia
Copyright © 2011. PT.TRIAS NATHOMI CHEMINDO - All Rights Reserved
Web Design by Nimrod Sitohang
UA-102567637-1