Steam Sterilizer Class B Sterilization. Pre & Post Vacuum System

Steam Sterilizer Class B Sterilization. Pre & Post Vacuum System
Feature
Sterilization temperature 121°C to 135°C, EN-285 class B Sterilization cycle
Pre vacuum-water filling-heating-sterilizing-ventilation-post vacuum drying-end cycle

Pre vacuum air removal and Post vacuum Drying system
Pre-vacuum for effective air removal that results in increasing sterilization performance.
Post-vacuum for drying with remaining steam removal

Full automatic operation system with Microprocessor PID program controller
Easy operation with full automatic process cycle operated by microprocessor controller from pre-programmed process cycle

Self-diagnostic and Safety system
In case of any malfunction, it alarms and displays error codes for easy maintenance, being stop working with automatic ventilation process for safety purpose

Air filtration cooling system
For the process of drying cycle, 0.2µm HEPA filtered clean air flows into the chamber in order to protect air contamination and to cool down below 60°C

Built-in steam generator and water reservoir
Water re-circulation system reduces the total sterilizing water consumption and pre heated double jacket chamber stand – by for quick operation

Automatic door locking system

Door can be easily sliding up and down to open or close by counter balanced weighing mechanism. Simply  press start key to operate, door will be automatically locked and unlocked by mechanical can lock system. During operation cycle, door cannot be opened

Safety Mechanism
  1. Over pressure release valve
  2. Over temperature protector with Thermostat
  3.   Higher temp set protector by Digital high alarm limit
  4. Visible and Audible alarm system
  5. Automatic dual door locking system

Programmed Sterilization cycle
Model
Temperature
(°C)
Pressure
(kgf/cm²)
Sterilizing Time (min)
Drying Time
(min)
Unwrapped 1
121
1.1
20
15-20
Unwrapped 2
134
2.1
5
15-20
Wrapped 1
121
1.1
30
20-25
Wrapped 2
134
2.1
15
20-25
Liquid
121
1.1
20
0
Bowie Dick
134
2.1
4
5-10
User Program
110-135
0.4-2.3
4-30
0-60

MODEL
LAC-6065SP
LAC6105SP
Dimensions                   Outer
(W x D x H mm)          Inner
525x725x1255
338x500x378
525x925x1255
338x705x378
Chamber                      Capacity
                                       Type
                                       Material
63ℓ
90ℓ
Double Jacketed Square chamber
Stainless steel 304 (STS 316 L option)
Steam Generator
Built-in separate Stainless Steel Boiler 5.5kW water reservoir
Stainless Steel Tray
W 294 x D 475 mm
W 294 x D 675 mm
Sterilization             Temp. Range
                                Pressure Range
                                Course
121°C - 135°C (Max)
0.4 – 2.3 Kgf/cm²
Liquid /Unwrapped 1 & 2 /Wrapped 1 & 2 /B/D test /User Program
Vacuum
Pre-vacuum with water ejector vacuum pump system
Controller
Microprocessor PID Program Controller with LCD Monitor
LCD monitor for Temperature, Pressure, Timer, Program cycle
Door
Manual vertical sliding door, Automatic Door Locking System
Safety
Over pressure release valve, Over temperature protector, Higher temp set protector
Printer
Optional Thermal Printer
Electric Supply
110V, 60Hz or 220V, 50/60Hz

Related product you might see:

Share this product :

+ comments + 1 comments

January 12, 2016 at 4:39 PM

DESCO is leading manufacturers of Laboratory Micro Pestle in India. Delivering best quality products and Value for Money. For more details check out our website.

Post a Comment

 
Support : PT.TRIAS NATHOMI CHEMINDO | Alat-Alat Laboratorium | Indonesia
Copyright © 2011. PT.TRIAS NATHOMI CHEMINDO - All Rights Reserved
Web Design by Nimrod Sitohang
UA-102567637-1