FD5508 Floor-Model Freeze Dryer -55ºC (-85ºC optional)

Our Laboratory Freeze Dryers offer condenser capacities ranging from 3 litre up to 18
litre. The condenser is integrated in the cabinet. On the top of our models a wide
range of flexible options can be fitted:
• Stainless steel manifolds for flasks
• Clear acrylic chambers
• Stainless steel chambers for shelves and flasks
• Shelf systems (heated or not heated)
The units can be ordered with a standard – 55 ºC condenser or a two stage system
down to – 85 ºC in case solvents are used with a low freezing point. All freeze dryers
are standard including vacuum pump and oil mist trap. The vacuum pump is a direct
driven oil sealed 2 stage rotary vacuum pump 200 l / minute.
We have our compact bench top models which can easily be installed on top of a
table and we have our robust floor models.
Overall specifications (Both FD and TFD freeze dryers)
• Stainless Steel condenser;
• Hot gas defrost possibility after a run;
• Very durable compressors;
• Option for manual or automatic run;
• User-friendly drain;
• User-friendly control panel with following specifications:
o Key switch on / off
o Condensor on / off
o Vacuum on / off
o Release vacuum
o Defrost on / off
o Manual / automatic selection
o Digital temperature display
o Digital vacuum display
Ice capacity per 24 hours (L)
5 liter / 24 hours
Total ice capacity (L)
8 liter
Condenser temperature (ºC)
< - 55 ºC standard (-85ºC optional)
Please change model number 55 to 85 (for example FD8508
Compressor (HP)
1/3 HP
Cabinet dimensions (W x D x H)
805 x 750 x 885 mm (W x D x H)
Weight (Kg)
120 Kg
230 V / 50 Hz
Microprocessor control
Hot gas defrosting
Temperature display
Yes (ºC)
Vacuum display
Yes (mTorr)
Release function
Yes with needle valve (inert gas backfill)
Autorun programming

Related product you might see:

Share this product :

Post a Comment

Support : PT.TRIAS NATHOMI CHEMINDO | Alat-Alat Laboratorium | Indonesia
Copyright © 2011. PT.TRIAS NATHOMI CHEMINDO - All Rights Reserved
Web Design by Nimrod Sitohang